1. Skip to navigation
  2. Skip to content
  3. Skip to sidebar

Cake Stand Handles

  • This item is no longer available. Please click here to view other items in my store.

6mm Diamond Core Tipped Drill Bit Hole Saw China Porcelain Ceramic Cake Stand

6mm Diamond Core Drill Bit

This Drill bit is suitable to drill 6mm holes into plates to fit the Cake Stand Handles that are listed in my Store

Also suitable for drilling into: Ceramic, Porcelain, Marble, Granite, Teracotta

These drill bits are used in the building industry as they are fast action & cost effective


  • When drilling in hard, abrasive materials such as  limestone, sandstone, hard ceramic and porcelain tiles, marble or granite, it is  critical to have lots of lubrication.  With these hard materials, it is common  to drill under water or to have a small amount of water constantly running over  the drill bit and bore hole.

  • Use rotary action only not hammer action

  • The life of any type of diamond drill bit  depends upon the hardness, abrasiveness and thickness of the material being  drilled and the specific drilling techniques used (drill speed, pressure and  lubrication), however, the diamonds of a drill bit don't actually wear  out as much as they wear off due to heat and friction caused by the  extreme hardness and abrasiveness of the material drilled.

  • When using diamond drills on glass, ceramic or  porcelain tile, limestone, marble and granite, etc, it is very important to have  only light to medium pressure on the drill and to let the bit "drill at its own  speed".  Increasing pressure will not speed up the cutting noticeably, but it  will increase the friction considerably and quickly cause the bit to overheat.   This not only burns up the bit, but it also heats up the surrounding surface and  can cause heat fractures or breakage to occur.

  • Always wear safety glasses

Postage for drill bit will be free if purchased with any of my Cake stand Handles

Postage & Handling

Within Australia

FREE per additional item

Payment methods accepted